DynaColor DynaGuard 200 Instrukcja szybkiej instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla DVR DynaColor DynaGuard 200. DynaColor DynaGuard 200 8 stron.

Drukuj stronę

Basic Setup

Follow the description to set up the DVR for date/time, recording and viewing video. All

configurations can be set via either DVR front panel or DynaRemote

through LAN.

Enter OSD Setup menu:

•

Press MENU to enter the OSD menu.

•

Enter password using Channel keys. The default passwords are as below.

Administrator Password

1 2 3 4

•

Strongly suggest changing the passwords to prevent unauthorized access.

Date / Time Setting:

•

Select <Date/Time> in System Setup menu to enter the Date/Time menu.

•

Select the date and time using LEFT/RIGHT keys; then adjust the value using UP/DOWN keys.

•

The new date and time settings take effect after confirm the changes.

To Define Recording Settings:

•

Select <Record Setup> from the Main menu.

•

Select a Preset Configuration setting from <Best Quality>, <Standard>, <Extended Record>,

<128Kbps DSL>, <256Kbps DSL> and <512Kbps DSL>.

•

Adjust the Recording schedule, Pre-alarm, Circular and Audio parameters.

•

When the settings are complete, press ENTER to confirm and save the settings; or ESC to

abort.

To Select Viewing Mode:

•

Press MODE button repeatedly to select the wanted display mode. The available viewing

modes are full-screen, 2×2 and 3×3 split-window.

Network Setup

Using LAN / Cable Modem:

Use the LAN setup when you plan to use a LAN, WAN, or Internet connection without a dialup

modem. It requires an Ethernet connection to a network. The default ID of your DynaGuard

series DVR must be changed to avoid network conflicts.

•

From Main menu, select <System Setup> <Network Setup>, set the <LAN/PPPoE Select>

item to <LAN> or <PPPoE> according to your network application, and enter <LAN/PPPoE

Setup>.

•

For DHCP user, set the DHCP to <ON>. The IP address, Netmask, Gateway and DNS settings

are retrieved from network servers. DHCP is dynamic; the settings will change from time to time.

User Password

4 3 2 1

, the remote software, on PC

www.dynacolor.com.tw

200