DynaColor DynaGuard 200 Instrukcja szybkiej instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla DVR DynaColor DynaGuard 200. DynaColor DynaGuard 200 8 stron.

terminals on the RS-485 port by RS-485 cable respectively.

•

To set up dome protocol and ID, press MENU to access the Main menu, and select <Camera

Setup>. The available protocols include <DynaColor>, <Pelco D>, <Pelco P>, <AD422> and

<None> (default). Note that ID number must match the ID address defined by the dome.

•

To configure the RS-485 parameters, select <System Setup> from Main menu, and then select

<RS485 Setup>. The default DynaGuard

Data Bits, 1 Stop Bit and No Parity.

Dome Control Button:

Basic Playback Operation

Searching Recorded Video by Time:

•

Press SEARCH button to enter the Search menu; the From Time and End Time of the available

video is listed on top of the screen. The value is unchangeable.

•

Use Direction buttons to move the cursor for setting the Start Time; adjusting the date and time

values by UP/DOWN keys. Press ENTER to confirm or ESC to abort.

•

Move the cursor to <Begin Playback> and press ENTER to start playing back the selected

200 series DVR RS-485 settings are 9600 Baud, 8