GREAT PLANES ElectriFly PEAK 400 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka GREAT PLANES ElectriFly PEAK 400. GREAT PLANES ElectriFly PEAK 400 13 stron.

to be charged to the output connector. Pay special attention to

ensure that the desired battery polarities are the same as the

charger's. The positive (+) battery lead (red) should be

connected to the Peak 400's square, positive (+) charge lead

(red), and the negative (-) battery lead (black) should be

connected to the Peak 400's rounded, negative (-) charge

lead (black). It is highly recommended to use pre-assembled

battery leads to avoid possible erroneous operation as a

result of using poor quality connections.

WARNING! Do not short the battery connections, as

permanent damage to the battery and/or the charger

could result and void your warranty.

Controls: The Peak 400 charger includes one current

adjustment switch, and one black pushbutton. The switch

adjusts the charge current for the desired battery. The

pushbutton is used to initiate the charge process, and can

be used to manually halt a charge process that is currently

under way (if desired).

CHARGING B

TTERIES

CHARGING B

TTERIES

This charger is capable of charging batteries containing

from 1 to 10 NiCd or NiMH cells in series. Three charge

current rates are available; 0.5A or 500mA (great for

charging smaller electric flight packs), 1.2 amps (for

medium sized electric Speed 400 aircraft packs) and up to

2.5 amps (for charging larger electric Speed 400 size

packs). Low charge currents are more gentle on batteries

and tend to result in more accurate, full charges but take