GREAT PLANES ElectriFly PEAK 400 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka GREAT PLANES ElectriFly PEAK 400. GREAT PLANES ElectriFly PEAK 400 13 stron.

longer to fully charge batteries. Smaller cells, such as

"AAA" size cells and smaller can easily overheat when

charged with excessive charge currents, and therefore

should only be charged at low rates. High charge currents

result in much quicker charge times, but are more stressful

on batteries which can shorten their overall life span.

Larger cells, such as "AA", "A", and "2/3 sub-C" size can

handle higher charge currents, but battery temperature

should be monitored during the charge process to make

sure the battery does not overheat. The charger will remain

in the "Peak" charge state until the battery is removed from

the charger, the 2 hour time limit has been reached, peak

has been detected and charger "switches" to trickle

charge or another input command is given to the charger.

NiCd and NiMH Batteries: nickel-cadmium and nickel-

metal hydride batteries are charged using the peak

detection method. This method can result in a battery

safely receiving approximately 95-98% full charge, after

which time the charger will automatically switch to a gentle

trickle charge current. Trickle charge will help the battery

safely reach its 100% full charge potential.

To charge a battery:

1. Set the charger's current adjustment switch to the

appropriate charge current setting to match the battery

(consult your battery supplier if there is any question as to what

is the appropriate setting). "AAA" sized cells, and/or batteries

rated at 600mAh capacity and above should be charged at the

1.2A setting. "AA" and larger sized cells should be charged at

the 2.5A setting. Cells rated below 500mAh capacity should be