GREAT PLANES ElectriFly PEAK 400 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka GREAT PLANES ElectriFly PEAK 400. GREAT PLANES ElectriFly PEAK 400 13 stron.

The Peak 400 will automatically supply trickle charge current

to NiCd and NiMH batteries immediately after quick charge

has ended.

The trickle charge current level is determined by the setting of

the fast charge current switch. The approximate trickle charge

rates are as follows:

Fast charge setting

The Peak 400 charger will indicate that fast charge has ended

and trickle charge has begun by the LED flashing only under

the selected battery type (i.e. NiCd or NiMH). The charger will

remain in the trickle charge state until the battery is removed

from the charger, the 3 hour time limit has been reached, or

another input command is given to the charger.

The Peak 400 charger utilizes a unique and handy safety

feature to warn if problems exist when attempting to quick

charge a battery. If a charge's LEDs flash red and green

simultaneously, it is an indication that one of 3 potential

problems exists, as follows:

a. The battery was not properly connected to the output

before the charge button was pressed.

TRICKLE CHARGE

500mA

1.2A

2.5A

SAFETY FEA

Trickle charge rate

40mA

60mA

100mA

TURES