DayStar KJ04520BK Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe DayStar KJ04520BK. DayStar KJ04520BK 8 stron. 2007 and up jeep wrangler jk body lift 2 door and 4 door
Drukuj stronę
6.
Slowly raise up the jeep with the jacking block between the jack and the tub of
the jeep, about 4" off the body mounts and place a 4x6 jacking block between
the frame and the jeep tub. Remove one mount at a time.
7.
Place thread lock on the stud extenders.( 2 at a time ) Using a 5/8 wrench in-
stall the extenders on the body mount and tighten down.
8.
With the extenders tight install the body mount spacer over the stock mount.
9.
With the spacer mount installed. Install the mount into the fame support.
NOTICE: When installing the front grill mount put the 2 studs in grill frame
first, using the 2 studs and nut to hold the mount in the grill.
6