AFG 3.0 AE Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Trenażer eliptyczny AFG 3.0 AE. AFG 3.0 AE 20 stron.
Również dla AFG 3.0 AE: Podręcznik użytkownika (20 strony)

Drukuj stronę
3. 0AE C O NSO L E OP E RATI ON
SE L EC T IN G T HR Z O NE P R OGRAM
1) Select THR ZONE using the PROGRAM QUICK KEY and press ENTER.
2) Set TIME using the ARROW KEYS on the programming button and press ENTER.
• At this time, your program has been successfully saved into memory and can be used for future workouts.
3) Set desired HEART RATE using the ARROW KEYS on the programming button and press ENTER.
4) Press START to begin the program.
In this program, the large LED dot matrix window displays your heart rate during exercise. The middle row
represents your target heart rate (THR) and the other rows equal +/-2 heart beats. If you are working out
beneath your THR, the LEDs BELOW the middle row will illuminate. If you are over, the LEDs ABOVE the middle
row will illuminate. Your current heart rate is represented by the flashing column and the window will refresh
every 5 seconds.
NOTES:
1) There is a 4-minute warm-up built into this program at level 1 resistance.
2) After 4 minutes the resistance will automatically adjust to bring your heart rate within 5 beats of the
target number you selected at the beginning of the program.
3) If there is no Heart Rate detected, the unit will not change resistance levels up or down.
4) If your Heart Rate is 25 beats over your Target Zone the program will shut down.
) To RESET your program information and delete it from memory, press and hold the ENTER key for 5
seconds (after you have selected the THR ZONE program).
20
3.0_4.0 AE_Rev.1.6.indd 20-21
4.0AE CONSOLE DISPLAY
A
J
100
90
80
TIME
70
SPEED
HEART RATE
60
INCLINE
50
40
30
P1. MANUAL
P2. INTERVALS
P3. WEIGHT LOSS
P4. CONSTANT WATTS
20
P6. INCLINE 2
P7. THR ZONE
P8. CUSTOM
10
B AC K
E NT ER
S T A R T
I N C LIN E %
Q U ICK STAR T
C H A N G E D I S P L A Y
H
F
D
E
A) MONITOR DISPLAY: Speed, Time, Heart Rate, Distance, Calories, Incline, Watts and Resistance Level.
B) LARGE LED WINDOW: Display program profiles.
C) STOP: Press to pause/end your workout. Hold for 3 seconds to reset the elliptical.
D) START: Press to begin exercising, start your program, or resume exercising after a pause.
E) PROGRAMMING BUTTON: Used to select Program, Level, Time, and other options. Press to change display
feedback during workout.
During programming:
ARROWS: Scrolls through programs and adjusts program settings.
ENTER: Confirms setting and advances to next step.
BACK: Returns to previous step.
F) ONE-TOUCH INCLINE KEYS: Used to reach desired incline more quickly.
G) ONE-TOUCH LEVEL KEYS: Used to reach desired resistance more quickly.
H) INCLINE ARROW KEYS: Used to adjust incline in small increments.
I) LEVEL ARROW KEYS: Used to adjust resistance level in small increments.
J) QUICK PROGRAM KEYS: Used to select programs more directly.
SCAN VIEWING WINDOWS
To have the display windows rotate continuously (Speed, Heart Rate, Incline, Calories, Level and Watts), hold
the ENTER button for 4-5 seconds. Press ENTER again to turn off scan feature.
B
A
20
18
DISTANCE
16
14
CALORIES
LEVEL
12
WATTS
10
8
6
P5. INCLINE 1
4
2
S T O P
L E V E L
HO L D T O R ESET
C
G
I
21
8/27/07 3:36:47 PM