Celec ES-10 Instrukcja instalacji w terenie - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji w terenie dla Obudowa Celec ES-10. Celec ES-10 10 stron.

1. Un Pack the ES-10 from box using Plastic Strip Cutter.

2. Collect the Accessories as per the Packing Slip.

3. Remove any cardboard or thermocol packing inside the ES-10 given for support during

transportation.

4. Do not use ES-10 in case of any Breakage or loose connections or Oil Spill inside.

CAUTION

Indoor Use Only, Type-1 Enclosure.

: -

1. Choose the dry and Clean Wall to Install the ES-10 taking care conduit connections from Bottom side

Enclosure Size is 400 x 300 x 120 mm and weight 10kg (22 Pounds).

2. Premark the Mounting holes on wall or structure.

3. Make a Drill for the wall plugs.

4. Fix the Enclosure on wall with fasteners.

UNPACKING

MOUNTING

-4-