Daytona DTJ10T Instrukcja obsługi i instrukcje bezpieczeństwa - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcje bezpieczeństwa dla Walety Daytona DTJ10T. Daytona DTJ10T 8 stron. Heavy duty hydraulic toe jack
Drukuj stronę
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surface,
such as concrete slabs.
4. Lifting device only. Immediately after lifting,
support the vehicle with appropriate means.
5. Use caution if lifting with Toe. Toe must be
positioned against a secure lifting point. Load must
be centered on Toe. Only lift on solid surfaces.
6. Do not adjust safety valve.
7. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
8. Keep clear of load while lifting and lowering.
9. Lower load slowly.
10. Do not use for aircraft purposes.
11. Apply parking brake and chock
tires before lifting vehicle.
12. Lift vehicle only at manufacturer-
recommended locations.
13. Inspect before every use; do not use
if parts loose or damaged.
14. Keep your work area clean and well lit.
Cluttered work areas invite accidents.
Page 2
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
For technical questions, please call 1-888-866-5797.
15. Keep bystanders, children, and visitors away while
operating Jack. Distractions can cause you to
lose control. Protect others in the work area.
16. Stay alert. Watch what you are doing, and use
common sense when operating a jack. Do not use
a jack while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating jacks may result in serious personal injury.
17. Store idle jacks out of reach of children
and other untrained persons. Jacks are
dangerous in the hands of untrained users.
18. Jack service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
19. When servicing a jack, use only identical replacement
parts - refer to attached, product-specific parts list
and diagram. Follow instructions in the "Inspection,
Maintenance, And Cleaning" section of this manual.
Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
20. Maintain labels and nameplates on the Jack. These
carry important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
21. Before use, read manufacturer's instruction
manual for the vehicle (or object) you will lift.
22. When lifting only one wheel, support the load
immediately with one jack stand (not included)
placed under the side of the vehicle being lifted.
Align the saddle of the jack stand directly under
the vehicle's seam or recommended lifting point.
Item 57664