Dynafold Paper Folder PF-330 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny składające Dynafold Paper Folder PF-330. Dynafold Paper Folder PF-330 16 stron. Automated setup folding machine
Również dla Dynafold Paper Folder PF-330: Instrukcja obsługi (16 strony)

Drukuj stronę

(4) Preparations

1. Installation of the following plates:

First, put both upper and lower folding plates

in place and lock them firmly. (Picture 4)

Insert the connector on coaxial cable into the

plug located on the inner wall of the rear cover

(Picture 5, 6 & 7) and fasten the screw.

Picture 5

2. Preparation of Paper Feed Tray:

If standard paper size is used, there is a scale on the auxiliary paper feed tray. Align the paper with

the scale (Picture 8) and fit the paper guides to the paper width (Picture 9) and tighten the knurled

screw (Picture 10).

Picture 8

If non-standard paper is used, put the paper on the center and fit the paper guides to the paper width

then tighten the knurled screw.

Picture 4

Picture 6

Picture 9

- 7 -

Picture 7

Picture 10