Dynafold Paper Folder PF-330 Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Фальцювальні машини Dynafold Paper Folder PF-330. Dynafold Paper Folder PF-330 16 сторінок. Automated setup folding machine
Також для Dynafold Paper Folder PF-330: Посібник з експлуатації (16 сторінок)

Друкувати сторінку

(4) Preparations

1. Installation of the following plates:

First, put both upper and lower folding plates

in place and lock them firmly. (Picture 4)

Insert the connector on coaxial cable into the

plug located on the inner wall of the rear cover

(Picture 5, 6 & 7) and fasten the screw.

Picture 5

2. Preparation of Paper Feed Tray:

If standard paper size is used, there is a scale on the auxiliary paper feed tray. Align the paper with

the scale (Picture 8) and fit the paper guides to the paper width (Picture 9) and tighten the knurled

screw (Picture 10).

Picture 8

If non-standard paper is used, put the paper on the center and fit the paper guides to the paper width

then tighten the knurled screw.

Picture 4

Picture 6

Picture 9

- 7 -

Picture 7

Picture 10