Dynalink 56K e-modem II Podręcznik szybkiej konfiguracji - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Router sieciowy Dynalink 56K e-modem II. Dynalink 56K e-modem II 6 stron.

56K e-modem II Quick Set-up Guide

2. You will see the modem listed next to a COM Port. Note down the COM port

number in this box [

3. Click on your modem's COM port and click More Info. If a table of ATI responses

is reported, then the modem and computer are communicating. If a table is not

reported, but instead an error message such as CANNOT OPEN PORT, please

refer to the Troubleshooting section.

The modem has been installed successfully and passed all our tests. Any problems

that arise when the modem is used by other applications are not related to the

installation of the modem, but to the setup of the software using the modem. We

suggest that you now proceed to the next section, as the Internet will give you

access to our website support area. If you have problems during this step you can

be confident that the problem is not a basic modem installation problem, but rather

the setup of the Internet software.

The Internet

In order to connect to the Internet you will need to establish an account with an

Internet Service Provider (ISP). Enclosed with your modem is a CD containing an

introductory offer from an ISP. Once you have registered with an ISP, they will provide

you with assistance regarding connecting to the Internet and setting up an e-mail

account.

Once you are connected to the Internet, you will find further information on Dynalink

Modem's World Wide Web site at www.dynalink.com.au/support (Australia) or

www.dynalink.co.nz/support (NZ). Here you can learn how to setup the BVRP

PhoneTools

Software, extensive troubleshooting information, downloads and much

other information.

BVRP Phonetools

Dynalink supplies the PhoneTools® software on CD. The software allows you to fax

with your modem and use the modem as a Telephone Answering Machine (TAM).

Contact Dynalink if you need assistance.

To install the software, insert the CD. If a menu does not load automatically, click

Start – Run and enter d:\Autorun.exe (substitute d: with your CD drive letter), then

click OK. Click on "Install Software Utilities" and choose PhoneTools. Follow the on-

screen prompts. A full User's Manual can be found installed with the software.

FAX/TAM Software (Optional)