Dynamic DT1100 Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do zwalczania owadów Dynamic DT1100. Dynamic DT1100 2 stron. Flying insect trap

Drukuj stronę

OWNER'S MANUAL

FLYING INSECT TRAP

MODEL: DTl 100

Thank you for purchasing the

DYNATRAP® flying insect trap!

IMPORTANT SAFETY INSTRUCTIONS

WARNING, When using electric appliances, basic precautions should always be followed, including the following:

- To disconnect, turn all controls to the off ("0") position, then remove plug from outlet.

- Unplug from outlet when not in use and before servicing or

cleaning.

- To

reduce the risk of electrical shock, do not put appliance in waler or other liquid.

- This appliance

provided with double insulation. Use only identical replacement ports.

- Connect only too circuit that is protected by o ground-fault circuit-interrupter (GFCI).

See instructions for Servicing of Double-Insulated

Appliances.

INSTRUCTIONS FOR DOUBLE-INSULATED, CORD-CONNECTED APPLIANCES:

In o double-insulated appliance, two systems of insulation ore provided instead of grounding. No grounding means

provided

on o double-insulated appliance, nor should o means for grounding be added to the

appliance.

Servicing of o double-insulated

appliance requires extreme core and knowledge of the system, and should be done only by qualified service personnel.

Replacement ports for o double-insulated appliance must be identical to those ports in the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions before using the DYNATRAP® Insect Trap and keep for future

reference.

I. Always turn unit off and disconnect plug before servicing, cleaning, or changing bulb.

2. Do not mount the unit near heat, gos, oil or other flammable

materials.

3. Mount product out of reach from children.

4. Never operate this product ii

hos o damaged cord or plug, if it is not working properly, if it hos been dropped or

damaged, or if it hos been dropped into water.

5. This product is equipped with 2-conductor cord and 2-prong polarized plug os o safety

feature.

This plug will lit in o

polarized outlet only one

way.

If the plug does not fully fit in the outlet, then reverse the plug. If

still does not fit,

then

contact

o qualified electrician. To reduce the risk of electrical shock, only plug into o proper~ installed outlet.

Do not attempt to defeat this safety feature.

Do not insert fingers or any foreign objects into the unit while it is connected to on electrical

outlet.

7. Collected insects within the unit may contribute to fire, so clean

insects

from the unit frequently.

8. Do not clean this product with water

spray.

Do not place where it con foll into water, or near flommoble

materials.

9. Do not touch fan while in motion.

Do not abuse cord--never carry or hong unit by cord or yank

to disconnect from receptacle. Keep cord away from heat,

oil, or sharp

edges.

Extension

cords

used with this product must be marked with suffix

letters

"W-A" and with a tag stating "Suitable for Use

with Outdoor Appliances".

12.

Use

only extension cords that hove plug and receptacles that match the product plug. Replace or repair damaged cords.

INSTALLATION

OPERATING INSTRUCTIONS

I. Unpack unit. Save carton for off-season storage (if needed).

If hanging or mounting the unit, place approximately 3-6 feel above the floor/ground level for optimal catch role and easy

access for cleaning.

3. For weekly cleaning, remove the screw securing the retaining cage and then twist the cage clockwise. Remove the damper by

grasping the crossbar near the edge of the damper. Pull up firmly. Remove any buildup from the inside of the retaining cage

and fan with o brush (included). Replace damper, snop firmly into place.

If mounting the unit to o wall,

install

the mounting bracket lo the side of the DTl

100.

This bracket slides

into

side wall of

the DTllOO.

5. Plug cord into on outdoor outlet or UL listed extension cord os described in "IMPORTANT SAFETY

INSTRUCTIONS".

For best catch results leave unit on at all times, except when cleaning or

servicing.

7. Catch rote activity will be higher at night. For best catch results it is recommended to keep the unit away from competing light

sources. Intended for household use only.

CLEANING

Frequent cleaning will prolong the life of the unit, ensure fire prevention and provide for more efficient

operation.

1. Be sure to clean the unit once per week

2. Switch the unit off and unplug before cleaning

For week~ cleaning, remove the screw securing the retaining cage and then twist the

cage

clockwise. Remove the damper by

grasping the crossbar near the edge of the damper. Pull up

firm~.

Remove ony buildup from the inside of the retaining cage and

fan with o brush (included). Replace damper, S11op firmly into place.

4. For major cleaning, remove the lour screws securing the fan housing to the light

housing.

After removing the screws, gently

pull the fan housing away from the light housing. Using o soft brush, remove dirt and debris from the light

housing.

Once the

cleaning process has been completed, align the screw holes

the fan housing with the screw holes in the lighting unit and

tighten the screws to the hose of the lighting unit.

5. When replacing the retaining cage - DO NOT press/ push against the screen windows.

REPLACING BULB

The Light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure

optimal UV effectiveness. Even though the bulb's light may be visible to you, its ability to attract insects diminishes over time.

Turn power switch to "off"

position.

UNPLUG UNIT, and allow bulb to cool before

replacing.

2. Remove the screw securing the retaining cage and then twist the

cage

clockwise. Turn the unit upside

down.

3. Remove the lour screws securing the Ion housing to the light housing. After removing the screws, gently pull the Ion housing

away

from the light

housing.

Using o soft brush, remove dirt and debris from the light housing. Once the cleaning process hos

been completed, untighten the screw securing the hose of the light bulb to the light

housing.

Slide the metal bracket to the

side.

Cover the bulb with o cloth to protect your finger and hand. Grasp the bulb (with your hand and fingers protected by the cloth)

and gently pull the bulb from the socket.

Remove any debris from the lamp socket with o brush before inserting the new bulb. Replace the metal plate over the hose of

the bulb and lighten the retaining

screw.

5. Align the screw hales in the Ion housing with the screw holes

the lighting unit and tighten the screws to the hose of the

lighting unit.

6. Replace the retaining coge at the bottom of the unit.

Replacement fluorescent bulbs con be found at your local retailer

or con be ordered directly from

DYNNt11C.

by colling

1-877-403-TRAP (8727) or visiting www.dynotrap.com

HOW THE DYNATRAP® INSECT TRAP WORKS

Flying insects ore attracted to the unit by UV light and CO2 that

is generated by the phato-cotolysis between the UV lamps and

special

TI02

coating. The Ion then pulls the insects into the screened

hose, trapping them until they dehydrate and die. The hose con be

removed, allowing the contents to be periodically emptied into

the

trash.

The see-through screen shows the insects trapped in the

compartment,

alerting you when the net needs ta be emptied.

TROUBLESHOOTING

Problem:

Possible cause:

Corredion:

Bulb does not illuminate

I. No electrical power.

1. Check plug and receptacle and fuse or circuit breaker.

and fan does not spin.

2. Check to make sure power is switched to the "on" position.

Bulb illuminates, but fan

Shorted fan.

I.UNPLUG

UNIT:

Examine fan to see that

ii is

free from

does not

spin.

foreign material, dirt or build-up of dead

insects.

dean unit as

in "CLEANING"

section.

Fon spins, but bulb does

1. Bulb not seated

1. Check all sockets for proper bulb seating and alignment.

not illuminate.

properly.

2. Replace bulb ii needed following instructions under "Replacing

2. Burnt out

bulb.

Bulb".

LIMITED WARRANTY

C. warranties ta the original purchaser that this product is free from defective materials and

workmanship. This warranty is limited to remedy any defective part for a period of one year from date of

original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply

ta the light bulb, nor to, in our judgment, misuse or abuse. If this unit has been altered, no warranty is

force. This warranty does not apply if this unit is purchased outside the United States, excluding Canada

and Mexico. In no case shall

IC. be liable for any accidental, punitive, consequential, or any other

damages af any kind for breach of this or any other warranty, expressed or implied, whotsoever. Some

states do not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights

that vary from state to state.

PARTS & ACCESSORIES AVAILABLE

PART

DESCRIPTION

41050

7-Wott Replacement Fluorescent Bulb (I piece)

41052

Fon Blade and DC Motor Ultra-Long Life Replacement

41053

Retaining Cage

41059

Woll Mount Brocket

41061

Lorge Capacity Net (lo be used instead of the Retaining Cage, suitable for extra large catch performance)

Dynamic Solutions Worldwide, LLC

12247 W. Fairview

Ave.

Milwaukee, WI 53226

Phone: 414-431 -2819

Toll

free:

1-877-403-TRAP (8727)

Toll free fax: 877-403-3293

Email: [email protected]

Visit us online at www.dynotrop.com

Dynamic Solutions Worldwide, LLC

SAVE THESE INSTRUCTIONS

lntertek