GALA Gala-Sprint Instrukcja instalacji i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Armatura łazienkowa GALA Gala-Sprint. GALA Gala-Sprint 12 stron. Hydromassage columns

Drukuj stronę

GENERAL CONSIDERATIONS

- For your column to function correctly, the water

supply pressure must not be higher than 5 bar or

lower than 2 bar. The recommended water

pressure for the use of the hydromassage function

should not exceed 3 bars. If the water system of

your home is above 3 bars you will have to reduce

the flow of water before changing the function

from shower to hidromassaje, avoiding thus

inconvenient water blasts coming from the jets.

For safety reasons, however, it must not exceed

55ºC. Always respect these limits. If the pressure

or temperature of the water is higher, the column

could be damaged. On the other hand, if the

pressure of the water is lower, your column may

not function correctly.

- The thermostatic tap regulates the temperature

by activating the thermostatic cartridge. If the

boiler switches off too often and cold water comes

out when using any of the functions of the column,

clean the filters of the thermostatic taps and, if the

problem persists, reduce the temperature of hot

water coming from the boiler or heater with the

appropriate control on the device. In all cases,

consult the technical characteristics of the boiler.

HYDROMASSAGE

Before a hydromassage: if you have not used a

certain function of your hydromassage for some

time, the anti-limescale injectors should be

checked as indicated in the hydromassage

maintenance instructions.

Pressure of the water jet: Regulate the water flow

for a more or less powerful massage.

Combinations of the type and duration of massage

and the temperature of the water enable you to

adapt the hydromassage to your requirements.

In general, the intensity of the water jet has the

following effects:

-Greater intensity: toning effects

-Less intensity: relaxing effects

Gala-Sprint

The hydromassage should never be excessively

strong.

Temperature of the water: we recommend that this

be between 30 ºC y 39 ºC:

Hydromassage:

-Cold (30 - 35ºC). With mainly toning effects.

-Neutral (36 - 37ºC). For relaxing effects.

-Hot (37 - 39ºC). For muscular applications.

Thermostatic tap:

You can select the desired

temperature by means of the "temperature indicator

control". Turn the on-off control until you reach the

desired water flow rate. The water will be at the

temperature you have selected.

On the "temperature indicator control", there is a

safety button that prevents temperatures over 37ºC

being selected by mistake.

temperature, press the button to unblock this safety

mechanism.

Hydromassage process:

Select the desired function using the function selector,

which permits the following options:

Hand- held shower massage. Allows you to

apply a specific massage type to a specific part

of the body.

Body massage with vertical, rotating jets. For

use on most parts of the body.

Turn the 3-outlet jets, equipped with an anti-limescale

device, in the most appropriate direction, though you

can later change it to direct the water jets onto

whatever parts of the body you want.

Adjust the temperature of the water.

Select the appropriate function.

Turn the water on progressively until you obtain the

most appropriate hydromassage pressure.

If you want a higher