Airdream Prestige DL Annex Instrukcja użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja użytkownika dla Akcesoria Airdream Prestige DL Annex. Airdream Prestige DL Annex 8 stron. Inflatable

Roof support tubes: Airdream Prestige DL roof support poles 2, Airdream Vision

DL 300 roof support poles 2 ; Airdream Vision DL 390 roof support poles 3 ;

MotoAir roof support poles 1

Inflate the tubes supplied to a pressure of 7-8psi. You will notice that Velcro is

attached on the end of each tube. Insert the poles into the centre part of the roof

for straight tubes, or alternatively curved part of the awning for curved tubes.

These tubes will strengthen the roof and enable you to obtain a better shape.

During calm weather you can remove these tubes and attach them to the front

tubes to make a veranda bar.

To give the awning the correct shape and stability we advise that all guy lines are

fitted and pegged correctly.

Suitability

The inflatable awning is designed for touring and weekend camping. During

severe storms we would advise you to dismantle the awning as a precaution.

The awning is not designed for permanent site camping or commercial use.

UV Deterioration

Airdream uses only top quality materials in the production of the Inflatable

awnings. However all coated polyester materials are subject to UV Deterioration

if exposed to long periods of direct sunlight. To avoid this problem try and camp

in a shaded area.

Condensation

Inflatable awnings are produced in Climatech material. This material contains a

high proportion of synthetic materials and under certain climatic conditions, such

as cool environment and high moisture, condensation can take place. This should

not be confused with leaking. The condensation can be vastly improved by

creating extra ventilation.

3/8