Automotive Data Solutions iDatastart Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zdalny rozrusznik Automotive Data Solutions iDatastart. Automotive Data Solutions iDatastart 12 stron.
Również dla Automotive Data Solutions iDatastart: Instrukcja obsługi (18 strony)
Drukuj stronę
Your iDatastart system may enable remote engine start by performing one of the following button sequences on
your factory key fob:
BUTTON
Press on
Press on
OR
BUTTON
Press on
Press on
NOTE: This feature may not be supported on some vehicles. If supported, the chosen button sequence will be
communicated to you by your iDatastart Authorized Dealer at the time of installation. The remote start range
will be equal to your factory key fob's door lock range.
ADJUSTING ENGINE RUNTIME SETTINGS
Once remote started from your factory key fob or long-range remote, your vehicle will run for the programmed
'runtime' setting. The default runtime is 15 minutes but it can also be programmed for 3, 5, 10, 25, 30 or 35
minutes. If you wish to change your remote start runtime setting, contact your iDatastart Authorized Dealer.
KEY TAKEOVER FOLLOWING REMOTE START
The 'key takeover' procedure ensures that your engine does not shut down upon entering the vehicle, during
the programmed remote start runtime. To prevent your vehicle from shutting down, complete the steps below
within the programmed delay time (45 seconds, 90 seconds, 3 minutes or 4 minutes):
For Standard Key Vehicles
1. Unlock and enter vehicle
2. Close doors
3. Insert key into ignition and turn ignition to ON position
FUNCTION
Start engine
Stop engine
FUNCTION
Start engine
Stop engine
2022-01-27 © Automotive Data Solutions Inc. 5/11
TR1110A