Automotive Data Solutions iDatastart Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zdalny rozrusznik Automotive Data Solutions iDatastart. Automotive Data Solutions iDatastart 12 stron.
Również dla Automotive Data Solutions iDatastart: Instrukcja obsługi (18 strony)
Drukuj stronę
4. Press foot brake
For Push-To-Start Vehicles
1. Unlock and enter vehicle with valid smartkey
2. Close doors
3. Press foot brake
NOTE: This feature may not be supported on some vehicles. If available, the programmed 'key takeover' delay
time will be communicated to you by your iDatastart Authorized Dealer at the time of installation.
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing, the remote starter must be placed in 'Valet Mode'. The 'Valet Mode'
will disable remote start functionality. To activate or deactivate the 'Valet Mode', follow the instructions below:
With Vehicle Key:
Cycle ignition OFF/ON 2x rapidly, then press brake 3x.
FUNCTION
Valet Mode ON
Valet Mode OFF
With iDatastart Antenna:
Turn ignition ON, then press & hold button for 5 seconds
FUNCTION
Valet Mode ON
Valet Mode OFF
REMOTE START TROUBLESHOOTING
If your iDatastart remote fails to start the vehicle, the parking lights will flash three times immediately, then
flash a number of times according to the errors below:
# OF PARKING LIGHT FLASHES
1
2
# OF PARKING LIGHT FLASHES
1
2
2022-01-27 © Automotive Data Solutions Inc. 6/11
TR1110A