AgriProTech BirdTrack Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontrola szkodników AgriProTech BirdTrack. AgriProTech BirdTrack 12 stron. Acoustic bird repeller

4. Programming the different menus

Screen and menu name
Activation of the
"programmable" alarm
Activation of the
"luminosity" alarm
Emission of N sounds
(test emission)
Sound volume
Sound recurrence
(Interval between each
signal)
8
If you wish to program the start and end time of signal emissions, activate this alarm
and set the time of your choice in the next two menus.
 Press OK button to enter this menu.
 Press OK again to choose active or inactive.
 Once you have chosen, press Select.
 Press OK button to confirm your choice and go to the next menu.
It is possible to program the AviTrac® device based on sunrise and sunset. The
"luminosity" alarm needs to be activated in order for emissions to start and stop
depending on the luminosity sensor data.
 Press OK button to enter this menu.
 Press OK again to choose active or inactive.
 Once you have chosen, press Select.
 Press OK button to confirm your choice and go to the next menu.
Via this menu, sounds can be emitted instantly without programming start and end
times. It can be used as a "shortcut". To use this function you must choose the
number of sounds (N) to be randomly diffused.
This menu has no impact on programming. It can be used to test an emission
 Press OK button to enter this menu.
 Choose the number of sounds to be emitted by pressing the OK button
repeatedly.
 Once the desired number of sounds is reached, press the Select button.
 Press OK button to confirm your choice and go to the next menu.
 Press OK button to enter this menu.
 Choose the desired sound volume by pressing the OK button repeatedly.
 (Minimum: 05; Maximum: 15 = 120 dBA @ 1 meter)
 Once you have selected the desired volume, press on the Select button.
 Press OK button to confirm your choice and go to the next menu.
Break time setting between each signal emission (recommended: 20/30 min.)
 Press OK button to enter this menu.
 Program the seconds by pressing the OK button repeatedly then press the
Select button to validate the seconds and switch to the minutes.
 Program the minutes by pressing the OK button repeatedly then press the
Select button to validate the minutes and switch to the hours.
 Program the hours by pressing the OK button repeatedly then press the Select
button to validate the hours.
 Press OK button to confirm your choice and go to the next menu.
© 2020 AgriProTech- All rights reserved.
Programming
- 02 98 96 08 12 -
www.agriprotech.fr