AgriProTech BirdTrack 사용자 설명서 - 페이지 8

{카테고리_이름} AgriProTech BirdTrack에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AgriProTech BirdTrack 12 페이지. Acoustic bird repeller

페이지 인쇄

4. Programming the different menus

Screen and menu name

Activation of the

"programmable" alarm

Activation of the

"luminosity" alarm

Emission of N sounds

(test emission)

Sound volume

Sound recurrence

(Interval between each

signal)

If you wish to program the start and end time of signal emissions, activate this alarm

and set the time of your choice in the next two menus.

 Press OK button to enter this menu.

 Press OK again to choose active or inactive.

 Once you have chosen, press Select.

 Press OK button to confirm your choice and go to the next menu.

It is possible to program the AviTrac® device based on sunrise and sunset. The

"luminosity" alarm needs to be activated in order for emissions to start and stop

depending on the luminosity sensor data.

 Press OK button to enter this menu.

 Press OK again to choose active or inactive.

 Once you have chosen, press Select.

 Press OK button to confirm your choice and go to the next menu.

Via this menu, sounds can be emitted instantly without programming start and end

times. It can be used as a "shortcut". To use this function you must choose the

number of sounds (N) to be randomly diffused.

This menu has no impact on programming. It can be used to test an emission

 Press OK button to enter this menu.

 Choose the number of sounds to be emitted by pressing the OK button

repeatedly.

 Once the desired number of sounds is reached, press the Select button.

 Press OK button to confirm your choice and go to the next menu.

 Press OK button to enter this menu.

 Choose the desired sound volume by pressing the OK button repeatedly.

 (Minimum: 05; Maximum: 15 = 120 dBA @ 1 meter)

 Once you have selected the desired volume, press on the Select button.

 Press OK button to confirm your choice and go to the next menu.

Break time setting between each signal emission (recommended: 20/30 min.)

 Press OK button to enter this menu.

 Program the seconds by pressing the OK button repeatedly then press the

Select button to validate the seconds and switch to the minutes.

 Program the minutes by pressing the OK button repeatedly then press the

Select button to validate the minutes and switch to the hours.

 Program the hours by pressing the OK button repeatedly then press the Select

button to validate the hours.

 Press OK button to confirm your choice and go to the next menu.

[email protected]

Programming

- 02 98 96 08 12 -