Cell2 SAF101H Instrukcja instalacji i obsługi dla użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla użytkownika dla System bezpieczeństwa Cell2 SAF101H. Cell2 SAF101H 6 stron. Electronic handheld siren 12/24vdc
Drukuj stronęSAF101H Siren_v.1.0
Button Mapping:
The switches SW1, SW2 and SW3 may be mapped with other buttons to grouped
according to your usage and application needs.
1. Press and hold SIREN and RADIO for 3 second to enter PROGRAMMING MODE.
VOL- and VOL+ will blink to indicate that you are in PROGRAMMING MODE.
2. While in PROGRAMMING MODE, press the desired button to program (i.e. SW1,
SW2 or SW3).
3. While the programing switch blinks, press the desired button(s) that you would like to
map with this switch. The possible button combinations are as followed:
Setting
SW1
Mapping
with
SW1
SW2
X
SW3
X
LIGHT (SW4)
O
SIREN
O
4. Once set, press the programmed button again to save the binding. You may
then program another button.
5. Once every switch is set, press and hold SIREN and RADIO for 3 second to exit
PROGRAMMING MODE. VOL- and VOL+ will stop blinking to indicate that you have
exited from PROGRAMMING MODE.
SW2
SW3
O
O
O
X
O
O
O
O
- 9 -
SAF101H Siren_v.1.0