DYNANAV Dynaflow 2 Instrukcja instalacji i obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Systemy kontroli DYNANAV Dynaflow 2. DYNANAV Dynaflow 2 15 stron.
Drukuj stronęGPS RADIO RECEIVER
GPS RADIO RECEIVER gives you the GPS RECEIVER STATUS, CURRENT LOCATION in Degrees,
Minutes and Seconds, TIME ZONE (which you can change) and GMT and LOCAL time.
Pressure Sensor
Pressure Sensor and Relay displays your current Flow Reading in either Gals/Minute or Liters/Minute.
Also this is where you set the transition point for the Relay to turn on/off the spray marking to your GPS. It is
important to make this RELAY ACTIVATION PRESSURE is somewhere between the operational Boom
Pressure and the Check Valve pressure.
The SENSOR READING OFFSET is for calibrating the zero point of the Pressure Transducer. For all the
later Transducers, the pressure should show -5PSI during Suck Back.
730 – 11731 BAYNES ROAD, PITT MEADOWS, BC, CANADA, V3Y 2B4
WEB PAGE:
www.dynanav.com
SIMPLE BY DESIGN – FLEXIBLE IN APPI\LICATION
EMAIL: [email protected]
5
PHONE: 604-465-0009
FAX: 604-465-0084