Galaxy DX 95T Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Transceiver Galaxy DX 95T. Galaxy DX 95T 10 stron. 10 meter amateur mobile transceiver with built-in frequency counter & starlite face plate

Drukuj stronę

23. NB/ANL LED: This LED lights green when the NB/ANL circuit is on.

24. CHANNEL DISPLAY: The channel display indicates the current selected channel.

25. PAD LED: This LED lights green when the 40dB attenuator circuit is on.

NOTES

HIGH SWR ALERT: All three LEDs (NB/ANL, GNF & PAD) light red when your

SWR is higher than about 3:1. This alert is accurate only at

maximum power output. This is not an exact indicator of 3:1

SWR, but it is an indication that you should check your SWR

reading.

REAR PANEL

1. ANTENNA: This jack accepts a 50-ohm coaxial cable with a PL-259 type plug.

2. DC POWER: This jack accepts the 13.8V DC power cable with built-in fuses. The

power cord provided with the radio has a black and red wire. The black goes to

negative and red goes to positive.

3. PA SP: This jack is for PA operation. Before operating, you must first connect a

PA speaker (8 ohms, 4W) to this jack.

4. EXT. SP: This jack accepts a 4 to 8 ohm, 5-watt external speaker. When the

external speaker is connected to this jack, the built-in speaker will be disabled.