909 RC1200 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła 909 RC1200. 909 RC1200 12 stron.

Setting up

CAUTION.

Always ensure that the saw is switched off

and unplugged from the mains supply before installing

or removing a blade. Wear work gloves when replacing

a blade.

1. To fit the saw blade rotate

the blade clamp in a anti

clockwise direction.

2. Whilst holding the blade

clamp open, insert the

new saw blade.

3. Let go of the blade clamp

(3) to lock the saw blade

in position.

4. Pull on the blade to ensure

it is securely fastened.

WARNING.

Make sure that the

blade is securely fastened before

starting the saw.

Failure to do so may result in

serious injury.

1. Connect the plug to the

mains supply.

2. To start the saw squeeze the

trigger switch (1).

3. For convenience you can

depress the lock ON button

and the saw will continue to

operate.

4. To stop the unit squeeze the

trigger and the lock on button

will disengage and the unit

will stop.

Vary the speed to suit the blade

and the material being cut with

the use of the speed control dial

on the trigger (7).