Autonics ADIO-PN Instrukcja obsługi produktu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Systemy wejścia/wyjścia Autonics ADIO-PN. Autonics ADIO-PN 10 stron. Remote i/o boxes (profinet)
Również dla Autonics ADIO-PN: Instrukcja obsługi produktu (10 strony)
Drukuj stronę
Indicators
■ Status indicator
01. The power supply of sensor
Indicator
LED color
Status
ON
Green
Flashing
(1 Hz)
US
Flashing
(1 Hz)
Red
02. The power supply of actuator
Indicator
LED color
Status
Green
ON
Flashing
(1 Hz)
UA
Red
ON
03. Product initialization
Indicator
LED color
Status
US, UA
Red
ON
04. System failure
Indicator
LED color
Status
OFF
SF
Red
ON
Flashing
05. Bus failure
Indicator
LED color
Status
OFF
BF
Red
ON
Flashing
06. Ethernet connection
Indicator
LED color
Status
Green
OFF
L/A1
ON
L/A2
Flashing
Yellow
07. Transmission rate of the Ethernet
Indicator
LED color
Status
Green
100
ON
Description
Applied voltage: normal
The settings of the rotary switches is
changing.
Applied voltage: low (＜ 18 VDCᜡ)
Description
Applied voltage: normal
Applied voltage: low (＜ 18 VDCᜡ),
Error in the rotary switches
Applied voltage: none (＜ 10 VDCᜡ)
Description
ADIO initialization failure
Description
No error
Watchdog timeout, system error
DCP signal service is initiated via the bus.
Description
No error
Low speed of physical link or no physical link
No data transmission or con昀椀guration settings
Description
No Ethernet connection
The Ethernet connection is established.
Data transmission
Description
Transmission rate: 100 Mbps
■ I/O port indicator
01. Pin 4 (C/Q)
Indicator
LED color
Status
OFF
Yellow
ON
ON
Green
Flashing
(1 Hz)
Flashing
0
(2 Hz)
Red
ON
02. Pin 2 (I/Q)
Indicator
LED color
Status
OFF
1
Yellow
ON
03. The power supply of the I/O port
Indicator
LED color
Status
Flashing
(1 Hz)
0,1
Red
Description
DI/DO: pin 4 OFF
DI/DO: pin 4 ON
Port con昀椀guration: IO-Link
Port con昀椀guration: IO-Link,
No IO-Link device found
IO-Link con昀椀guration error
• Validation failed, Invalid data length,
Data Storage error
• NPN: Short circuit occurred on the output of
pin 4 and pin 1
• PNP: Short circuit occurred on the output of
pin 4 and pin 3
Description
DI: pin 2 OFF
DI: pin 2 ON
Description
Short circuit occurred
in the I/O supply power (pin 1, 3)