high pointe 50F11 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny high pointe 50F11. high pointe 50F11 4 stron.

Installation/User Instructions - Horizontal Outlet Range Hood

12Volt DC. Models covered: 50F11,55F11,60F11

Caution!

For general ventilating use only. Do not use to exhaust hazardous or explosive

materials or vapors.

Caution!

Do not allow insulation, ceiling finishing materials, roofing materials, or other debris to

enter the fan housing or ductwork. Motor failures due to debris are not subject to warranty

coverage.

WARNING!

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

A) Do not use this fan with any solid state speed control device.

B) Installation work and electrical wiring must be done by qualified person(s) in accordance with all

applicable codes and standards, including fire related construction.

C) Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney)

of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer's

guidelines and safety standards such as those published by the National Fire Protection

Association (NFPA), The American Society for Heating, Refrigeration and Air Conditioning

Engineers (ASHRAE), and local code authorities.

D) When cutting into walls or ceilings, do not damage electrical wiring and other hidden utilities.

E) Use only metal ductwork. Exhaust air must be ducted to the outside. Do not vent exhaust air into

spaces within walls, ceilings, attics, crawl spaces or garages.

MAIN PARAMETERS

Rated Voltage: 12Volt DC

Rated Amps:1.2A

Motor Input Power: 12W

Lamp Power:1.5W

Rated Power:13.5W

DESCRIPTION OF THE DEVICE

1. Body groupware

2. Switch

3. Lamp

4. Knob

5. Impeller

6. Motor

7. Grease filter