Autool CT-200 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt czyszczący Autool CT-200. Autool CT-200 14 stron. Injector cleaner & tester
Również dla Autool CT-200: Podręcznik (18 strony), Podręcznik użytkownika (14 strony)

Drukuj stronę

Trademark

AUTOOL Technology Co, Ltd. has registered its trademarks in

different countries, the trademark is

the other trademark, service logo, domain, icon and company

name mentioned in this manual, they shall all belong to AUTOOL

and its other affiliated company, in other countries without the

registration yet of these trademark, service logo, domain name,

icon and company name of AUTOOL, here we announce they are

owned by AUTOOL. Any company or person shall not use the

trademark, service logo, domain name, icon and company name

of AUTOOL before getting approved by AUTOOL with written

certificates. Please visit our website www.autooltech.com or

email at [email protected] to contact us.

Safety War ning

Please read this manual carefully before using the instrument

for proper operation.

Be careful with the high temperature parts of the engine and

machine.

Please don't use the power cord if it is damaged. Please

check it before using the equipment if the equipment falls or is

damaged.

Do not hang the power cord alongside the side of the table,

chair or counter, and do not expose the power cord to high

temperature.

For a power cord extension, the extension cord should be

higher or equal level as the original equipment's power cord,

otherwise it will be over heated.

.With regard to

Do not plug the power cord in socket when the device is not

being used.

Do not pull the plug by pulling the cord, remove the power

plug instead.

Allow the unit to cool down completely before storing the unit

and wrap the cord.

To prevent fire, do not put equipment near to open containers

with flammable liquids (gasoline).

Ensure the ventilation when the fuel engine is under

operation.

The instrument should be placed in a well-ventilated room

without direct sunlight, and the "No Fireworks" and "Flame-

able Hazard Warning" signs should be posted.

The operator's hair, clothing, fingers or other parts of the body

should be kept away from the operating parts of the

equipment.

To prevent electric shock, do not touch the working equipment

in wetness or operate the equipment in the rain.

Please operate the device as described in the manual. Use

accessories recommended by the manufacturer.

In the case where the ultrasonic cleaning bath is not filled with

cleaning liquid, it is forbidden to open the ultrasonic system,

otherwise the ultrasonic equipment will be damaged.

The equipment case must be grounded.

Vehicle exhaust contains a variety of toxic and harmful gases

(such as carbon monoxide, hydrocarbons, nitrogen oxides,

etc.), so please keep good airflow when the machine is

working, preferably outdoor.