Autool CT-200 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt czyszczący Autool CT-200. Autool CT-200 14 stron. Injector cleaner & tester
Również dla Autool CT-200: Podręcznik (18 strony), Podręcznik użytkownika (14 strony)
Drukuj stronę
Pull the hand brake in testing and place the transmission in
neutral while blocking the front wheel.
Please wear safety glasses when handling the machine, but
not the daily glasses .
When disconnecting the fuel pipe joint under pressure, use a
towel to cover the joint to prevent the fuel bursting forth and
causing fire.
The main unit of the device uses the test solution, and the
cleaning liquid is used for cleaning. The ultrasonic cleaning
needs a special ultrasonic cleaning liquid, if user does not
have it, it can be replaced with a cleaning liquid equipped with
this equipment.
Note:
This manual describes the structure, functional characteristics
and operation methods of the CT 200 injector cleaning detector in
detail.
A brief description of the precautions, maintenance, and
abnormal handling in use.
Product Introduction
Welcome to the CT200 / CT150 injector cleaning detector
manufactured by Shenzhen Accidental Technology Co., Ltd.. The
CT200/ CT150 is a mechatronic product combined ultrasonic
cleaning technology and microprocessor oil pressure control
cleaning detection technology. The CT200/ CT150 can simulate
various working conditions of the engine, clean and inspect the
fuel injector of the car, and can also clean and disassemble the
fuel injector and the fuel supply system.
3
functions
Ultrasonic cleaning: To perform simultaneous cleaning on
several injectors and to remove the carbon deposits on the
injector completely.
Uniformity/Sprayability test: To test the uniformity
injecting amount of each injector, and to monitor the spraying
status of each injector with the help of backlight. This test is
also for reverse flush.
Leakage test: To test the sealing and dribbling conditions of
injectors under system pressure.
Injecting flow test: To check the injecting amount of the
injector in 15 seconds of constant injection.
Automatic test: To test injectors by simulating different
working conditions.
On-vehicle cleaning: The unit is equipped with various
adaptors and couplers that facilitate cleaning on the injectors
on vehicle.
functions
Adopting the powerful ultrasonic cleaning technology, the
equipment offers complete cleaning to the injectors.
Fuel pressure control through microcomputer offers stable
pressure control and large adjustable range, which is suitable
for all EGI vehicles and can help to achieve automatic
cleaning and testing of injectors.
With the help of microcomputer control and digital display, the
equipment makes possible automatic cleaning, testing
4
of