Dynaudio Focus 20 XD Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Dynaudio Focus 20 XD. Dynaudio Focus 20 XD 15 stron.
Również dla Dynaudio Focus 20 XD: Pierwsza konfiguracja (2 strony)
Drukuj stronę
Owner's Manual Focus XD
Operating with a cable.
Connecting only one
Operating the loudspeakers
loudspeaker with a cable
via a Hub or Connect
1. Connect the digital output for the signal
Dynaudio's innovative Connect system
source to the digital input (Digital
offers the option to operate the loud-
Audio IN) on one loudspeaker. You can
speakers completely wirelessly. The
choose whether to use the right or left
connection to the loudspeakers is
loudspeaker.
established by either a Dynaudio Hub or
2. Operate the connected loudspeaker as
Connect box to which the analog and/
master by setting the Channel Mode
or digital sources can be connected. For
switch on the rear side of the housing
more details, please refer to the Connect
to Master.
Owner's Manual or learn more at http://
3. Operate the other loudspeaker as slave
www.dynaudio.com/home-audio/connect/
by setting the Channel Mode switch
on the rear side of the housing to
Slave.
16
Connecting the digital signal source
Operating via Hub or Connect.
1. Install and configure the Connect
system according to the Connect
owner's manual.
2. On the rear side of the housing,
select the red, green, or blue
zone. Loudspeakers that belong to
a common zone can be operated
together using the remote control.
3. Operate one loudspeaker as master
and the other as slave by setting the
respective switch (Channel Mode)
correspondingly on the rear side of the
housing. The assignment of master and
slave is irrelevant.
dynaudio.com/focusxd
Connecting the analog signal source / Operating the loudspeaker without controlling the volume
Connecting the analog signal source.
Connecting the analog signal
Operating the loudspeakers
source
without controlling the volume
The loudspeakers can also output signals
You can also operate the loudspeakers
from an analog signal source. The signal
without controlling the volume yourself.
source is connected to the analog inputs.
The amplifiers integrated into the
loudspeakers function as a power
1. Connect the left analog output from
amplifier; volume is controlled via the
the signal source to the analog
source signal (e.g. pre-amplifier).
input (Analog Audio IN) on the left
loudspeaker.
1. Connect the left analog output from
2. Connect the right analog output
the signal source to the analog
from the signal source to the analog
input (Analog Audio IN) on the left
input (Analog Audio IN) on the right
loudspeaker.
loudspeaker.
2. Connect the right analog output
3. Operate one loudspeaker as master
from the signal source to the analog
and the other as slave by setting the
input (Analog Audio IN) on the right
respective switch (Channel Mode)
loudspeaker.
correspondingly on the rear side of the
3. Set the Channel Mode switch on the
housing. The assignment of master and
back side of the housing to External.
slave is irrelevant.
High sound pressure levels
In the External operating mode, signals
are amplified at the maximum. Connecting
a signal source with an uncontrolled or
maximum level can harm your hearing and
cause damage to the components.
►
Only connect controllable signal
sources.
►
Before switching on the loudspeakers,
turn down the volume for the signal
source using its volume control.
17