2hp ADSR Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Jednostka sterująca 2hp ADSR. 2hp ADSR 7 stron.

Installation

To install, locate 2 HP of space in your Eurorack case and confirm the positive 12 volts

and negative 12 volts sides of the power distribution lines. Plug the connector into the

power distribution board of your case, keeping in mind that the red band corresponds

to negative 12 volts. In most systems, the negative 12 volt supply line is at the bottom.

The power cable should be connected to the ADSR with the red band facing the front

of the module.

Specifications

Format: 2 HP Eurorack module

Depth: 47mm (Skiff Friendly)

Max Current: +12V = 24mA

-12V = 7mA