2hp ADSR Manual - Page 4

Browse online or download pdf Manual for Control Unit 2hp ADSR. 2hp ADSR 7 pages.

2hp ADSR Manual
Installation
To install, locate 2 HP of space in your Eurorack case and confirm the positive 12 volts
and negative 12 volts sides of the power distribution lines. Plug the connector into the
power distribution board of your case, keeping in mind that the red band corresponds
to negative 12 volts. In most systems, the negative 12 volt supply line is at the bottom.
The power cable should be connected to the ADSR with the red band facing the front
of the module.
Specifications
Format: 2 HP Eurorack module
Depth: 47mm (Skiff Friendly)
Max Current: +12V = 24mA
-12V = 7mA
4