Galvin Engineering Ezy-Wash TF81HJP Instrukcja instalacji produktu

Przeglądaj online lub pobierz pdf Instrukcja instalacji produktu dla Produkt hydrauliczny Galvin Engineering Ezy-Wash TF81HJP. Galvin Engineering Ezy-Wash TF81HJP 5 stron. Pre-rinse tapware

Galvin Engineering Ezy-Wash TF81HJP Instrukcja instalacji produktu
Version 1, 3 August 2017, Page 1 of 5
Ezy-Wash
®
PRODUCT CODE:
- TF81HJS
- TF81HJP
SPECIFICATIONS
 Galvin Specialised recommends the installation of strainers and pressure reducing valves prior to installing
the pre-rinse unit to ensure clean consistent water supply. Debris or poor water quality could cause the
trigger to seize or fail to seal.
This pre-rinse unit has a 6 star WELS rating, the Pot Filler attachments are 0 star to allow fast pot filling.
TECHNICAL DATA
Inlet
Outlet
Headworks
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strives to improve their products. Specifications may change without
notice. Higher temperature or pressures could result in premature failure and void the manufacturer's warranty.
TOOLS REQUIRED
 Adjustable spanner
 Hex key
Power drill
Pre-Rinse Tapware
Version 2, 3 August 2017, Page 1 of 5
TF81HJS
½" BSP – Male
TF81HJS
Trigger Spray
TF81HJP
Trigger Spray & Pot Filler
TF81HJS
Jumper Valve
TF81HJP
Jumper Valve
Min
100
Max
500
Min
5
Max
65
TF81HJS
3.5
TF81HJP
15
Chrome
TF81HJP