Galvin Engineering Ezy-Wash TF81HJP Ürün Kurulum Manualline
Sıhhi Tesisat Ürünleri Galvin Engineering Ezy-Wash TF81HJP için çevrimiçi göz atın veya pdf Ürün Kurulum Manualline indirin. Galvin Engineering Ezy-Wash TF81HJP 5 sayfaları. Pre-rinse tapware
Version 1, 3 August 2017, Page 1 of 5
Ezy-Wash
®
PRODUCT CODE:
- TF81HJS
- TF81HJP
SPECIFICATIONS
Galvin Specialised recommends the installation of strainers and pressure reducing valves prior to installing
the pre-rinse unit to ensure clean consistent water supply. Debris or poor water quality could cause the
trigger to seize or fail to seal.
This pre-rinse unit has a 6 star WELS rating, the Pot Filler attachments are 0 star to allow fast pot filling.
TECHNICAL DATA
Inlet
Outlet
Headworks
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strives to improve their products. Specifications may change without
notice. Higher temperature or pressures could result in premature failure and void the manufacturer's warranty.
TOOLS REQUIRED
Adjustable spanner
Hex key
Power drill
Pre-Rinse Tapware
Version 2, 3 August 2017, Page 1 of 5
TF81HJS
½" BSP – Male
TF81HJS
Trigger Spray
TF81HJP
Trigger Spray & Pot Filler
TF81HJS
Jumper Valve
TF81HJP
Jumper Valve
Min
100
Max
500
Min
5
Max
65
TF81HJS
3.5
TF81HJP
15
Chrome
TF81HJP