Dynex DX-DRTVM112 Podręcznik z informacjami dotyczącymi bezpieczeństwa - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik z informacjami dotyczącymi bezpieczeństwa dla Uchwyt TV Dynex DX-DRTVM112. Dynex DX-DRTVM112 15 stron. Support mural discret pour téléviseurs
Również dla Dynex DX-DRTVM112: (Angielski) Instrukcja montażu (15 strony), (Francuski) Podręcznik montażu (15 strony)
Drukuj stronęDX-DRTVM112
Installation instructions
STEP 1 - Determining the hole pattern on your TV
1
Carefully place your TV screen face down on a cushioned, clean surface to protect the screen from
damage and scratches.
2
If your TV has a table top stand attached, remove the stand. See the documentation that came with your
TV for instructions.
3
Measure the distance between the mounting holes on the back of your TV.
4
If your TV has a 200 x 200 mm hole pattern, you must install the bracket extensions (C) onto the TV
bracket (A).
5
If you need to install the extension brackets (C), install them on the front (flat side) of the TV bracket (A)
with four M6 x 14 mm screws (K) and four M6 nuts (L), as shown, using the phillips screwdriver and the
adjustable wrench.
You'll need
Nuts
Screws
K (4)
L (4)
200 mm
100 mm
75 mm
C
K
Phillips screwdriver
Adjustable wrench
200 mm
100 mm
75 mm
200 mm
200 mm
75 mm
75 mm
100 mm
100 mm
A
L
C (2)
5
TV bracket (A)