Dynex DX-DRTVM112 Podręcznik z informacjami dotyczącymi bezpieczeństwa - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik z informacjami dotyczącymi bezpieczeństwa dla Uchwyt TV Dynex DX-DRTVM112. Dynex DX-DRTVM112 15 stron. Support mural discret pour téléviseurs
Również dla Dynex DX-DRTVM112: (Angielski) Instrukcja montażu (15 strony), (Francuski) Podręcznik montażu (15 strony)
Drukuj stronęDX-DRTVM112
STEP 3 - Select screws and spacers
1
Select the hardware for your TV (screws and spacers). A limited number of TVs come with mounting
hardware included. (If there are screws that came with the TV, they are almost always in the holes on the
back of the TV.)
Select one of the following types of screws:
M4 × 12 mm screws (E) for a flat back TV.
M4 × 35 mm screws (F) for an irregular or obstructed TV back.
For an irregular or obstructed TV back, use the following spacers:
Screw is too
long
2
Remove the screws.
3
For a flat back TV, go to "STEP 4 - Option 1: Attaching the mounting hardware to TVs with a flat back" on
page 8.
-OR-
For an irregular or obstructed back, go to "STEP 4 - Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs" on page 9.
M4 spacers (H)
Screw fits
correctly
Screw is too
short
CAUTION: To avoid potential personal
injuries and property damage, make sure that there
are adequate threads to secure the brackets to your
TV. If you encounter resistance, stop immediately and
contact customer service. Use the shortest screw and
spacer combination to accommodate your TV. Using
hardware that is too long may damage your TV.
However, using a screw that is too short may cause
your TV to fall from the mount.
7