Coram Showers OFFSET QUADRANT Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Armatura łazienkowa Coram Showers OFFSET QUADRANT. Coram Showers OFFSET QUADRANT 8 stron.
Również dla Coram Showers OFFSET QUADRANT: Skrócona instrukcja obsługi (9 strony)
Drukuj stronę2
The Offset Quadrant can be assembled with the offset on either the right or left.
Note: The following instructions show installation of the Quadrant.
a
3
X
ø 6.5
mm
a: Place the wall channels on the tray ensuring they are vertical and an equal distance back from the front of the tray.
Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm
holes, 30mm deep and insert the wall plugs. b: Apply sealant to the back of the wall channels and around the fixing holes.
c: Fix the wall channels to the walls using 8 x 32mm screws.
a
4
a: Place the bottom rail onto the tray with its end mouldings inserted into the wall channels.
b: Centre the bottom rail between the wall channels so that there is an equal gap at each end.
b
X
X = Door widths
800 = 780 - 805mm
900 = 880 - 905mm
b
=
X
X = Widths
1000 x 800 = 980 - 1005mm
1200 x 800 = 1180 - 1205mm
1200 x 900 = 1180 - 1205mm
c
32mm
Y
Y = Widths
1000 x 800 = 780 - 805mm
1200 x 800 = 780 - 805mm
1200 x 900 = 880 - 905mm
Inside
=
3