Coram Showers OFFSET QUADRANT Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Armatura łazienkowa Coram Showers OFFSET QUADRANT. Coram Showers OFFSET QUADRANT 8 stron.
Również dla Coram Showers OFFSET QUADRANT: Skrócona instrukcja obsługi (9 strony)

Drukuj stronę

Check the door frame is vertical and is centrally positioned between the wall channels.

From inside the enclosure, in the positions shown, drill through the wall channels into the fixed panels using a 3mm drill bit,

do not drill too deep! Fix using 6 x 10mm screws.

PN40308

Fixed

panel

bracket

Fit 'flipper seals' (PN40308) onto the edge of the fixed

panels. Ensure the flipper seal 'flaps' are on the

inside.

Note: Wetting the glass with water will help fit the seals.

From inside the enclosure, place the fixed panel

retainer covers (PN80618) onto the top and bottom

fixed panel brackets. Fix using 12mm screws and fit

the retainer caps (PN50370).

From inside

PN50370

12mm

PN80618

Inside

PN40275

Outside

face of

door

Door

handle

holes

Push fit 'flipper seals' (PN40275) onto the back edge of the doors.

Ensure the flipper seal 'flaps' are on the outside of the doors.

Push fit 'magnetic seals' (PN80564) onto the closing edge of the

doors (the same side as door handle hole).

Note: Ensure the magnetic seals are positioned as shown.