Dynojet Power Commander III USB 109-411 Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Akcesoria motocyklowe Dynojet Power Commander III USB 109-411. Dynojet Power Commander III USB 109-411 5 stron. 2002-2004 honda vtx 1800c, 2002-2003 honda vtx 1800r
Drukuj stronę
Stock connector
PCIII connectors
i109-411
www.powercommander.com
Unplug this connector
Ground wire from PCIII
1)
Remove the seat. Remove both
side covers.
2)
Disconnect the black connector
from the ECU (Fig. A).
3)
Plug the connectors from the
Power Commander in line of
this connector and the ECU
(Fig. B).
NOTE: The connectors on the Power
Commander III USB are black.
It is critical that the Power
Commander be plugged into the
BLACK side of the ECU.
4)
Remove the ground bolt.
bolt is located in front of the
ECU next to the linked braking
proportional valve (Fig. C).
5)
Reinstall this bolt through the
eyebolt end of the ground wire
from the Power Commander
(Fig. C).
This
VTX 1800 - PCIII USB - 2