Dynojet Power Commander III USB 109-411 Instrukcje instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Akcesoria motocyklowe Dynojet Power Commander III USB 109-411. Dynojet Power Commander III USB 109-411 5 stron. 2002-2004 honda vtx 1800c, 2002-2003 honda vtx 1800r
Drukuj stronę
Red wire with yellow tracer
Supplied wire tap
Grey wire from PCIII
Wire cluster
i109-411
www.powercommander.com
Location: T op of ECU
3rd pin from right
Wire tap
6)
Locate the red wire with a
yellow tracer on the grey
connector side of the ECU.
7)
Connect the supplied wire tap
to this connector.
the tap is completely closed
(Fig. D).
It is recommended to use
silicone inside this connector .
8)
Connect the gray lead from the
Power Commander to the wire
tap. (Fig. E).
It is recommended to use dialec-
tric grease on this connection.
9)
Locate the cluster of wires in the
clear cover under the right hand
side cover (Fig. F).
Make sure
VTX 1800 - PCIII USB - 3