AGT INDUSTRIAL AGT-ST4040C Instrukcja obsługi produktu - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Urządzenia przemysłowe AGT INDUSTRIAL AGT-ST4040C. AGT INDUSTRIAL AGT-ST4040C 10 stron. 40ft x 40ft container roof shelter

Drukuj stronę

different directions. When the truss is up, tie the ropes to the heavy objects to

make sure the truss will stay upright steady, and use Self locking bolt (#15)to

connect the truss to the base plate, total (4) Self locking bolt (#15) are used to

secure one truss on the baseplate.

Repeat above step to put up all other trusses (from 2rd to 9th truss), and



connect all purlins. Now the whole structure is completely up. (refer to figure 5)

Parts used in this step.



- (56) Roof purlin (#5)

- (16) Ridge steel tension cable (#8)

- (8) Cable connection plate (#9)

- (10) Pull ear (#12)

- (36) Self locking bolt (#15)

- (63) Self locking bolt (#16)

Step 5 : Install roof cover

NOTE: The cover must be installed on a windless day. DO NOT attempt to install

the cover during windy conditions.

Figure 5