Cordless RoboImpact 800-874-4702 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Cordless RoboImpact 800-874-4702. Cordless RoboImpact 800-874-4702 10 stron.

Drukuj stronę

Do not store the tool and battery pack in locations where the temperature may reach or exceed

♦

122°F.

Do not incinerate the battery pack even if it is severely worn out. The battery pack can explode

♦

in a fire.

Be careful not to drop, shake, or strike the battery.

♦

Do not charge inside a box or container of any kind. The battery must be placed in a well venti-

♦

lated area during charging.

Do not dispose of battery packs into household waste, fire or water. Battery packs should be

♦

collected, recycled or disposed of in an environmentally-friendly manner.

FUNCTIONAL DESCRIPTION

This cordless impact is designed for use on bolts and nuts installation and removal also impact rated

auger bits.

1. Power Switch Depressing the power switch partially will energize the LED light (2) in front. Fur-

ther depressing will start the impact. The speed increases with the amount of depression. When re-

leased, the electronic brake will stop quick change chuck rotation within one second. A small amount

of sparks may appear next to the motor. This is normal as energy is being converted to heat for dissi-

pation.

3. Rotation Direction Switch Pushing this switch to the left will cause the chuck to spin in a "for-

ward" direction, and "reverse" when pushed to the right. Note: In the center position, this switch will

lock out the power switch.

4. 7/16" Quick Change The 7/16" quick change chuck will accept 7/16" hex adapters and auger

bits. Be sure the adapters and bits are fully inserted before operation tool. Otherwise the socket may fly

out and cause property damage or personal injury. Use only impact-type adapters and accessories.

5. Non-slip Handle The "rubberized" part of the handle gives a more comfortable grip during opera-

tion, shields operator from motor heat buildup, and helps in reducing vibration and fatigue.

6. Lanyard The lanyard is provided to help minimize the possiblity of the tool being dropped.

7. Li-Ion Battery This battery provides electrical power to the motor. Please charge it according to

the charging instructions listed in this manual.

8. Easy brush Access Cover The cover allows the user to access the carbon brush for replacement.