Cordless RoboImpact 800-874-4702 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Cordless RoboImpact 800-874-4702. Cordless RoboImpact 800-874-4702 10 stron.

Drukuj stronę

Check for damage to the tool, parts or accessories

which may have occurred during transport. Take

the time to thoroughly read and understand this

manual prior to operation.

Attaching or Removing Battery Pack

1. To connect battery, line up the tracks and attach

the battery pack. Slide toward the battery pack until

it locks into position with a click.

2. To remove the battery pack, push on the RED

button on top and release the battery pack.

Warning! Use only sockets and adapter

designed for impact uses. Other sockets may

break due to the high stress associated with

impact operations. Always wear eye protec-

tion device.

This product has been carefully inspected prior to leaving the factory. It should provide you with years

of satisfying service under normal operating conditions. Do not, however, force the tool to perform

outside of its design parameters. Such usage will void the warranty.

Warning! Always wear safety glasses or face-

shields when operating this product. Failure to do so

can result in dust, shavings or loose particles being

thrown into your eyes.

1. Slide the battery into the bottom of the housing handle until a click sound occurs. Do not force the

battery as it should slide easily into place with nominal force. Any difficulty doing so would indicate an

incorrect alignment.

2. Pull back the power switch slowly to engage the LED, then pull back further to achieve desired

speed. The speed increases with the amount of depression of the trigger switch.

ASSEMBLY

OPERATIONS

Push

Slide