Gamma Progression ES II+ Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma Progression ES II+. Gamma Progression ES II+ 17 stron.

POWER CONNECTION & CONTROLS

hybrid strings or metallic strings, we recommend setting tension 4-5 lbs. lower than you

would normally use for synthetic or natural gut strings.

MOUNTING THE FRAME

Setting Tension

The Progression ES II+ stringing machine

utilizes a rotary adjusting knob along with a

digital L.E.D. display to indicate the set

tension. To set the tension, rotate the ad-

justment knob clockwise to decrease the

displayed tension, counter-clockwise to

increase the displayed tension, until the

desired tension is displayed on the digital

display. Aramid fiber and Metallic strings

will generally string up tighter on the Pro-

gression ES II+ machine compared to syn-

thetic or natural gut strings. Therefore, when

stringing with Aramid (Kevlar, Technora)

Adjusting the Frame Support Posts

Place the racquet frame over the center

posts and onto the frame support. Loosen

the lever lock bolt on one support post. Slide

the post outward until the center support of

the racquet support slide is positioned near

the inside surface of the racquet frame.

Securely tighten the lever lock bolt.

Adjust the opposite post using the same

procedure.

Caution: To avoid racquet damage, the

center posts should not contact the racquet

prior to fixing the support posts.

Tightening the Center Supports

Tighten the Center Supports by turning the

adjustment knob clockwise until slight resis-

tance is felt.

Caution: Overtightening the Center Sup-

ports may cause racquet damage.