Major Manufacturing DRILL MASTER HIT-44 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Major Manufacturing DRILL MASTER HIT-44. Major Manufacturing DRILL MASTER HIT-44 12 stron. Drill master

Drukuj stronę

USING THE HIT-44

Prior to clamping the

HIT-44 to the door, check to

make sure the backset

adjustment knobs

correspond to the lock you

are installing. A 180 degree

turn of the knob will change

the backset to 2-3/8" or 2-

3/4"

Clamp the HIT-44 to the

door with a light pressure,

just enough to hold it on the

door.

Now tighten the black

plastic cantilever knobs

until snug.