Major Manufacturing DRILL MASTER HIT-44 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Major Manufacturing DRILL MASTER HIT-44. Major Manufacturing DRILL MASTER HIT-44 12 stron. Drill master

Drukuj stronę

One final turn of the main

clamp knob will secure the

HIT-44 to the door.

Drill the cross bore first

using the proper size multi-

spur bit and corresponding

break out plate on the op-

posite side. USE A LOW

RPM WHEN DRILLING

AND BACK OUT THE BIT

FROM TIME TO TIME TO

REMOVE CHIP BUILDUP.

When the cross bore has

been completed, drill the

edge bore. Snap in the

proper size bushing for the

job.