IKEA 705.178.77 Podręcznik - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik dla Piekarnik IKEA 705.178.77. IKEA 705.178.77 20 stron.
ENGLISH
Function
RISING
FAST PREHEAT
- +
SETTINGS
PYRO-CLEANING
MEAT PROBE
*Function used as reference for the energy efficiency declaration in accordance with Regulation (EU) No. 65/2014, Ecodesign for
Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019.
IMPORTANT:
During the self-clean cycle (pyrolysis) make sure to remove all
the accessories supplied, to prevent any further increase in the
outside temperature of the door and to ensure more efficient
cleaning of the bottom part of the oven.
Description of function
For optimal rising of sweet or savoury dough. To safeguard the quality of proving, the function will
not activate if the temperature in the oven is above 40°C. Place the dough on the 2nd shelf.
The oven does not have to be preheated.
To preheat the oven rapidly. At the end of the prehear the oven will select automatically the
CONVENTIONAL function. Wait the end of the preheat before inserting te food inside the oven.
To set the display (Time, Light, Volumes of sounds, energy saving).
For eliminating cooking spatters using a cycle at a very high temperature (over 400 °C). The
duration is automatically set to 120 minutes. Select ECO x 75minutes cycle in case of minor
presence of dirt.
The meat probe supplied allows the exact temperature (up
to 100°C) to be measured during cooking, to ensure optimum
cooking.
Based on the food being cooked, the required core
temperature can be set. It is very important to position the
probe accurately in order to obtain perfect cooking results.
Insert the probe fully into the fleshiest part of the meat,
avoiding bones and fatty parts (Fig. 1). For poultry, the probe
should be inserted sideways, in the middle of the breast,
taking care to ensure the tip does not end up in a hollow
part (Fig. 2). In the case of meat with very irregular thickness,
check it is cooked properly before removing it from the oven.
Connect the end of the probe in the hole located on the left
bottom part of the control panel.
IMPORTANT: if the function selected is not matching the meat
probe use, cooking will not start until the probe is removed. A
following message is displayed: REMOVE PROBE.
10
Fig. 1
Fig. 2