Major tech MT26 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT26. Major tech MT26 20 stron. 600v ac/dc bluetooth multimeter

Drukuj stronę
Major tech MT26 Instrukcja obsługi

4.6. DIODE TEST

WARNING: Never test diodes on a live circuit.
1. Set the rotary function switch to the
2. Press the MODE button until the
3. Insert the black test lead into the COM input jack and the red test lead
into the Ω input jack.
4. Touch the test lead probes to the component under test.
5. Forward voltage will indicate 0.4 to 0. 7 on the display. Reverse voltage
will indicate "OL". Shorted devices will indicate near 0 and an open
device will indicate "OL" in both polarities.

4.7. CONTINUITY

WARNING: Never test continuity on a live circuit.
1. Set the rotary function switch to the
position.
2. Press the MODE button until the "
appears on the LCD display.
3. Insert the black test lead into the COM input
jack and the red test lead into the Ω input jack.
4. Touch the test lead probes to the device or wire
under test.
5. A beeper will sound if the resistance is
approximately 50Ω or less and the resistance
value will be shown on the LCD display.
10 14
position.
symbol appears on the LCD display.
" symbol