Major tech MT26 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT26. Major tech MT26 20 stron. 600v ac/dc bluetooth multimeter

Drukuj stronę
Major tech MT26 Instrukcja obsługi

4.10. BATTERY REPLACEMENT

WARNING: To avoid electric shock, remove the test leads from the
meter before removing the battery/fuse cover.
1. Lift up the tilt stand.
2. Loosen the two Phillips screws on the battery/fuse cover.
3. Remove the battery/fuse cover.
4. Replace the batteries with three AAA batteries.
5. Observe proper polarity as shown inside battery compartment.
6. Install the battery cover and tighten the screws.
WARNING: To avoid electric shock, do not operate meter until the
battery/fuse cover is securely fastened to the meter.

4.10. FUSE REPLACEMENT

WARNING: To avoid electric shock, remove the test leads from the
meter before removing the battery/fuse cover.
1. Lift up the tilt stand.
2. Loosen the two Phillips screws on the battery/fuse cover.
3. Remove the battery/fuse cover.
4. Gently remove fuse and install new fuse into the holder.
5. Always use a UL recognized fuse of the proper size and value:
10A/600V (5 x 20mm) fast blow.
6. Install the batter cover and tighten the screws.
WARNING: To avoid electric shock, do not operate meter until the
battery/fuse cover is securely fastened to the meter.
10 16