Major tech MT715 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT715. Major tech MT715 16 stron. Ac trms open jaw clamp meter

Drukuj stronę

5. Operation

NOTES: Read and understand all WARNING and CAUTION statements

in this operation manual prior to using this meter. Set the function select

switch to the OFF position when the meter is not in use.

5.1. AC Current Measurements

WARNING: Ensure that the test leads are disconnected from the meter

before making current clamp measurements.

1. Set the Function switch to the AC Current.

2. Place the current fork around the middle of the test lead.

3. The clamp meter LCD will display the reading.

INCORRECT

CORRECT

5.2. AC (True RMS)/DC Voltage Measurements

1. Insert the black test lead into the negative COM terminal and the red

test lead into the positive V Ω

CAP terminal

2. Automatically change between AC or DC

3. Connect the test leads in parallel to the circuit under test

4. Read the voltage measurement on the LCD display