Major tech MT933 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Major tech MT933. Major tech MT933 16 stron. Cable length tester

6. 0PERATING

WARNING: Do not connect the unit to live voltage.

1. Each time the meter is turned ON, it should be calibrated before use.

2. Set the rotary switch from the OFF to O Position.

3. Connect the two leads for the red set of Kelvin clips are plugged into

the red terminals on the meter; Connect the two leads for the black set

of Kelvin clips are plugged into the black terminals on the meter.

Note: Make sure the calibration bar and Kelvin clips jaws are clean.

4. Connect the two alligator clips to the supplied copper rod, move the

clips as close together as possible.

6 8

Make sure that the clips are as close together as

possible in order to improve calibration accuracy.