Brita 3-Way Water Filter Dispenser System Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt hydrauliczny Brita 3-Way Water Filter Dispenser System. Brita 3-Way Water Filter Dispenser System 13 stron. 3-way water filter dispenser
Drukuj stronę
II.
Quality from the very start
1
Terms of warranty
The BRITA 3-Way Water Filter Dispenser system is subject to the
statutory guarantee of 2 years. A guarantee claim may be asserted
only if all instructions in this handbook are followed and observed.
2
Contents of the BRITA 3-Way Water Filter
Dispenser Starter Kit
To ensure you get the best result from your BRITA 3-Way Water
Filter Dispenser Starter Kit, please follow these instructions care-
fully.
Your BRITA 3-Way Water Filter Dispenser Starter Kit
includes the following (see fi g. 1):
1. P 1000 fi lter head with two settings including a convenient
locking handle
2. Flexible wall mount
3. P 1000 water fi lter cartridge
4. BRITA 3-Way Water Filter Dispenser (design may differ from
image shown)
5. BRITA electronic cartridge exchange indicator
6. Hose (1) length = 800 mm, 3/8" nut on one side and M8
connector on the other side, 2 Hoses (2+3), length = 450 mm,
3/8" nut on one side and M8 connectors on the other side
7. Hose (4), length = 800 mm and 3/8" nut on both sides
8. 2 Adapters 1/2" female thread to 3/8" male thread
9. Usage Instructions
10. Carbonate hardness testing strip
11. T-piece
12. Gaskets
Recommended tools for installation: a pipe wrench, an Allen key
(4 mm), a wrench and a screwdriver.
For wall mounting (optional), you need: two screws (e.g. 5 mm
thread diameter) and, if required, two wall plugs suitable for your
type of wall.
2
ENGLISH
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
(fi g. 1)